A complete 3D game development suite written purely in Java.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
jmonkeyengine/sdk/harness/run.xml

259 lines
12 KiB

<?xml version="1.0" encoding="UTF-8"?>
<!--
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved.
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners.
The contents of this file are subject to the terms of either the GNU
General Public License Version 2 only ("GPL") or the Common
Development and Distribution License("CDDL") (collectively, the
"License"). You may not use this file except in compliance with the
License. You can obtain a copy of the License at
http://www.netbeans.org/cddl-gplv2.html
or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the
specific language governing permissions and limitations under the
License. When distributing the software, include this License Header
Notice in each file and include the License file at
nbbuild/licenses/CDDL-GPL-2-CP. Oracle designates this
particular file as subject to the "Classpath" exception as provided
by Oracle in the GPL Version 2 section of the License file that
accompanied this code. If applicable, add the following below the
License Header, with the fields enclosed by brackets [] replaced by
your own identifying information:
"Portions Copyrighted [year] [name of copyright owner]"
Contributor(s):
The Original Software is NetBeans. The Initial Developer of the Original
Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun
Microsystems, Inc. All Rights Reserved.
If you wish your version of this file to be governed by only the CDDL
or only the GPL Version 2, indicate your decision by adding
"[Contributor] elects to include this software in this distribution
under the [CDDL or GPL Version 2] license." If you do not indicate a
single choice of license, a recipient has the option to distribute
your version of this file under either the CDDL, the GPL Version 2 or
to extend the choice of license to its licensees as provided above.
However, if you add GPL Version 2 code and therefore, elected the GPL
Version 2 license, then the option applies only if the new code is
made subject to such option by the copyright holder.
-->
<project name="run" basedir=".">
<target name="-init">
<property name="run.jdkhome" location="${nbjdk.home}"/>
<condition property="test.user.dir" value="${suite.dir}/build/testuserdir" else="build/testuserdir">
<isset property="suite.dir"/>
</condition>
<property name="suite.dir" location="${basedir}"/>
<property name="run.args.common" value='--userdir "${test.user.dir}" -J-Dnetbeans.logger.console=true -J-ea'/>
<!-- In case run from a suite module, to get app.name and/or branding.token: -->
<property file="${suite.dir}/nbproject/private/platform-private.properties"/>
<property file="${suite.dir}/nbproject/platform.properties"/>
<property file="${suite.dir}/nbproject/private/private.properties"/>
<property file="${suite.dir}/nbproject/project.properties"/>
<!-- CP with id="cluster.path.id" is expected to be passed as parameter to run.xml -->
<pathconvert property="install">
<path refid="cluster.path.id"/>
<regexpmapper from="(.*[/\\])platform[0-9]*$$" to="\1"/>
</pathconvert>
<!-- clear modulename_hidden files from external clusters so they do not influence the availability of
modules selected by the current cluster -->
<!-- We'll clear only clusters under 'build' folder to avoid deleting
files in binary platform/clusters (e.g. user hacks), while
un-hiding modules hidden by depended-upon suites. Cf. issue #172727 -->
<pathconvert property="cluster.path.projects" refid="cluster.path.id">
<regexpmapper handledirsep="true" from="^.*/build/[^/]+$$" to="\0"/>
</pathconvert>
<delete>
<pathfileset include="config/Modules/*_hidden">
<path path="${cluster.path.projects}"/>
</pathfileset>
</delete>
<!-- use nb.exe if exists (old platform), netbeans.exe otherwise -->
<condition property="run.app.exe" value="bin\nb.exe" else="bin\netbeans.exe">
<available file="${install}\bin\nb.exe"/>
</condition>
<property name="run.app.sh" value="bin/netbeans"/>
<property name="run.exe.candidate" location="${install}\${run.app.exe}"/>
<property name="run.sh.candidate" location="${install}/${run.app.sh}"/>
<!-- #63976: if disabling things, better to treat as a platform-based app -->
<condition property="app.name" value="test">
<or>
<and>
<isset property="disabled.modules"/>
<length string="${disabled.modules}" when="greater" length="0"/>
</and>
<and>
<isset property="enabled.clusters"/>
<length string="${enabled.clusters}" when="greater" length="0"/>
</and>
<and>
<isset property="disabled.clusters"/>
<length string="${disabled.clusters}" when="greater" length="0"/>
</and>
<!-- #66793: also treat as a platform-based app if using platform and have no branding -->
<not>
<available file="${run.exe.candidate}"/>
</not>
<not>
<available file="${run.sh.candidate}"/>
</not>
</or>
</condition>
</target>
<target name="-prepare-as-app" depends="-init" unless="app.name">
<property name="run.exe" location="${run.exe.candidate}"/>
<property name="run.sh" location="${run.sh.candidate}"/>
<mkdir dir="${test.user.dir}/etc"/>
<pathconvert property="run.extra.clusters">
<path>
<pathelement location="${cluster}"/>
<path refid="cluster.path.id"/>
</path>
<!-- Exclude all clusters located in NB install dir;
not exactly what netbeans.clusters specify, but good enough -->
<filtermapper>
<linecontains negate="true">
<contains value="${install}"/>
</linecontains>
</filtermapper>
</pathconvert>
<echo file="${test.user.dir}/etc/netbeans.conf">netbeans_extraclusters="${run.extra.clusters}"</echo>
<property name="run.args.prepared" value=''/>
</target>
<target name="-prepare-as-platform" depends="-init" if="app.name">
<property name="disabled.modules" value=""/>
<fail message="Platform cluster is not present in cluster.path: '${cluster.path.final}'">
<condition>
<not>
<matches string="${cluster.path.final}" pattern="[\\/]platform[0-9]*([;:]|$)"/>
</not>
</condition>
</fail>
<pathconvert property="run.platform.clusters">
<path>
<pathelement location="${cluster}"/>
<!-- Does not exclude clusters in which all modules are excluded, shouldn't be a problem -->
<path refid="cluster.path.id"/>
</path>
</pathconvert>
<pathconvert property="run.exe">
<path>
<fileset dir="${install}" includes="platform*/lib/nbexec.exe"/>
</path>
</pathconvert>
<pathconvert property="run.sh">
<path>
<fileset dir="${install}" includes="platform*/lib/nbexec"/>
</path>
</pathconvert>
<property name="branding.token" value="-"/> <!-- fallback value if not set -->
<property name="run.args.prepared" value='--branding ${branding.token} --clusters "${run.platform.clusters}"'/>
</target>
<target name="run" depends="-prepare-as-app,-prepare-as-platform">
<touch file="${cluster}/.lastModified"/> <!-- #138427 -->
<property name="run.args" value=""/>
<property name="run.args.ide" value=""/>
<property name="run.args.extra" value=""/>
<condition property="run.args.mac" value="-J-Xdock:name=${app.name}" else="">
<os family="mac"/>
</condition>
<exec osfamily="windows" executable="${run.exe}" failonerror="no" resultproperty="result.prop">
<arg value="--jdkhome"/>
<arg file="${run.jdkhome}"/>
<arg line="${run.args.common}"/>
<arg line="${run.args.prepared}"/>
<arg line="${run.args}"/>
<arg line="${run.args.ide}"/>
<arg line="${run.args.extra}"/>
</exec>
<exec osfamily="unix" dir="." executable="sh"
failonerror="no" resultproperty="result.prop">
<arg value="${run.sh}"/>
<arg value="--jdkhome"/>
<arg file="${run.jdkhome}"/>
<arg line="${run.args.common}"/>
<arg line="${run.args.prepared}"/>
<arg line="${run.args}"/>
<arg line="${run.args.ide}"/>
<arg line="${run.args.extra}"/>
<arg line="${run.args.mac}"/>
</exec>
<fail>
The application is already running within the test user directory.
You must shut it down before trying to run it again.
<condition>
<and>
<isset property="result.prop" />
<or>
<!-- unknown option exit code as returned from IDE by org.netbeans.api.sendopts.CommandLine -->
<equals arg1="${result.prop}" arg2="50346" />
<!-- unknown option exit code as returned from platform app by org.netbeans.CLIHandler -->
<equals arg1="${result.prop}" arg2="2" />
</or>
</and>
</condition>
</fail>
</target>
<target name="debug">
<fail unless="netbeans.home">This target only works when run from inside the NetBeans IDE.</fail>
<nbjpdastart name="NetBeans" addressproperty="debug.port" transport="dt_socket">
<classpath>
<pathfileset include="**/*.jar">
<path refid="cluster.path.id"/>
</pathfileset>
<fileset dir="${cluster}">
<include name="**/*.jar"/>
</fileset>
</classpath>
</nbjpdastart>
<property name="debug.pause" value="y"/>
<property name="debug.args" value="-J-Xdebug -J-Xrunjdwp:transport=dt_socket,suspend=${debug.pause},server=n,address=${debug.port}"/>
<antcall target="run">
<param name="run.args" value="${debug.args}"/>
<reference refid="cluster.path.id"/>
</antcall>
</target>
<target name="profile" description="Profile a project in the IDE.">
<fail unless="netbeans.home">This target only works when run from inside the NetBeans IDE.</fail>
<nbprofiledirect
jvmargsprefix="-J"
jvmargsproperty="profiler.jvmargs"
mainclass="org.netbeans.Main"
>
<classpath>
<pathfileset include="**/*.jar">
<path refid="cluster.path.id"/>
</pathfileset>
<fileset dir="${cluster}">
<include name="**/*.jar"/>
</fileset>
</classpath>
<rootspath>
<fileset dir="${cluster}">
<include name="**/*.jar"/>
</fileset>
</rootspath>
</nbprofiledirect>
<antcall target="run">
<param name="run.args" value='"${profiler.jvmargs}"'/>
<reference refid="cluster.path.id"/>
</antcall>
</target>
</project>